M.2 NVMe & U.2 Duplicator & Sanitizer - Low Volume

  • Description
  • Features
  • Specifications
  • These are low volume M.2 NVMe or U.2 duplicator and sanitizers. The 2-port version supports NVMe and SATA protocols, allowing for cross-interface duplication and a max speed of 24GB/m. The 4-port version supports only NVMe protocol with a max transfer speed of 10.2GB/min. They both support M key and B+M key M.2 devices and support 18TB+ capability.

    Intelligent Duplication Modes

    Systems and Files (Quick Copy Mode)

    1. The duplicator automatically copies only the data area, rather than the empty spaces within the capacity, which reduces the duration of the copy process.

    2. This copy mode supports the file formats such as Windows (FAT16/32/64/NTFS), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX). If the file system format to be copied is not among the supported formats above, then system will automatically switch to "whole media copy" mode.

    Whole Media

    1. The duplicator copies from the initial sector to the end, bit-by-bit.
    2. There are no format limitation in this mode.

    Impeccable High Speed

    These PCIe M.2 duplicator copies up to 10.2GB/min on all devices simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.

    High Compatibility

    Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX) formats.

    Whole media copy mode supports all system and proprietary formats.

    Supports various brands.

    Designed to support 18TB+ capacities.

    Supports MBR and GPT partitioning.

    Sanitization methods

    Quick Erase:
    Erase device index table, and only takes A FEW SECONDS to complete.

    Full Erase:
    Erases the entire device
    Secure erase:
    A National Institute of Standards and Technology 800-88.

    Skipping Bad Sectors

    End-users are given options to skip bad sectors from the source device. Access the function to select the numbers of bad sectors to skip, from 0 through unlimited.

  • Features Descriptions
    Operation Type ● Stand-alone, FPGA-based operation (Non-PC based system design).
    Controller Design ● Embedded controller is designed to support capacities over 18TB+. ● Constant improvement supports latest market-available devices.
    Protocols Supported ● Supports Native NVMe and SATA protocol
    Hot Swap Supported ● Supports hot swapping of devices.
    Bandwidth Performance ● Peak transfer speeds up to 10.2GB/min. (170MB/sec.) ● Dedicated bandwidth enables high-volume replications without speed degradation.
    Read-Only Source Port ● There is no option to disable this built-in feature and it is integrated with all U-Reach duplicators.
    Modular Port Design ● Modular ports are replaced quickly, which effectively reduce downtime and is cost-effective for long-term ownership.
  • Specifications Descriptions
    LCD Display ● 2 x 20 Backlit Monochrome LCD Display
    LEDs ● 3 LED Indicators per Port: ● Yellow (Power), Green (Pass), and Red (Fail)
    Control Panel ● 4 Push Buttons (▲, ▼, OK, ESC) and Asynchronous Erase Button
    Power Requirements

    ● Power Input: Universal Power 115VAC or 230VAC, 50/60Hz

    ● Power Output: 12VDC 9A

    Operational Temperature ● 0°C ~ 60°C (32°F ~ 140°F)
    Non-operational Temperature ● -20°C ~85°C (-4°F ~ 185°F)

    ● Operating: 20% ~ 80%, non-condensing

    ● Non-operating: 5% to 95%, non-condensing

    Packaging Dimensions (L×W×H)

    ● NVS200 – 11.5" x 9" x 3"

    ● NVS200USAS – 10" x 8" x 6"

    ● NV-BMS4 – 18" x 13.5" x 3.5"

    Product Weight

    ● NVS200 – 3.6 lbs.

    ● NVS200USAS – 5 lbs.

    ● NV-BMS4 – 7.1 lbs.

    Certifications ● FCC, CE, RoHS, and REACH
    MIL-STD-810G ● 501.5 / 502.5 / 507.5 / 514.6 / 516.6
    ISO/IEC ● 27037, 27041, 27042, 27043, and 27050