Scaleable HDD/SSD Duplicator & Sanitizer
- U-Reach HDD/SSD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.
Illustration of Copy Modes
The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive's controller chip.
Impeccable High Speed
U-Reach SATA HDD duplicator copies up to 18GB/min on all HDDs simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.
Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4), and Mac
Whole media copy mode supports all system and proprietary formats.
Supports various brands.
Designed to support 18TB+ capacities.
Supports MBR and GPT partitioning.
Erase HDD index table, and only takes A FEW SECONDS to complete.
Erases the entire HDD.
Complies with U.S. Department of Defense erasure standards.
A National Institute of Standards and Technology 800-88 accepted technique for properly purging hard drives. This method is supported by almost all modern SATA HDD.
Auto Rejection of Slow Devices
U-Reach duplicators enable end-users to set the minimum writing speed threshold. This feature was developed to prevent and to eliminate problematic devices that halts the duplication and sanitizing process.
Verification of Data Integrity
U-Reach duplicators makes straightforward copies, but it is imperative that the copied data are verified through a bit-by-bit process, this will ensure successful copied and reduce customer recalls.
Skipping Bad Sectors
End-users are given options to skip bad sectors from the source device. Access the function to select the numbers of bad sectors to skip, from 0 through unlimited.
Optional Adapters Supported
Event Log report
U-Reach HDD/SSD duplicators has an unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each devices completely. It is an important asset for production management and analysis.
Features Descriptions Operation Type ● Stand-alone, FPGA-based operation (Non-PC based system design). Controller Design ● Embedded controller is designed to support capacities over 18TB+. ● Constant improvement supports latest market-available devices. Bandwidth Performance ● Speed transfers of up to 9.0GB/min. (150MB/sec.) ● Dedicated bandwidth enables high-volume replications without speed degradation. Read-Only Source Port ● There is no option to disable this built-in feature and it is integrated with all U-Reach duplicators. Modular Cabling Design ● Modular-designed ports effectively reduce downtime and is cost-effective for long-term ownership Real-Time PC Monitoring ● View live status for: writing/reading speeds, total capacity, current function progress per port. Event Log Management ● Records: operating durations, individual port copy progressions, connected device models, capacities, serial numbers, and PASS or FAIL results. ● Device writing/reading speeds are recorded. ● Log report files are generated through the front USB port and are saved to USB devices.
Specifications Descriptions LCD Display ● Backlit Monochrome LCD Display LEDs ● 3 LED Indicators per Port: ● Yellow (Power), Green (Pass), and Red (Fail) Control Panel ● 4 Push Buttons (▲, ▼, OK, ESC) and Asynchronous Erase Button Power Requirements ● Universal Power: 115VAC or 230VAC, 50/60Hz Operational Temperature ● 5°C ~ 45°C (41°F ~ 113°F) Non-operational Temperature ● -20°C ~85°C (-4°F ~ 185°F) Humidity ● Operating: 20% ~ 80%, non-condensing ● Non-operating: 5% to 95%, non-condensing Packaging Dimensions (L×W×H)
● MT800H – 495.3 mm x 444.5 mm x 317.5 mm (19.5 in. x 17.5 in. x 12.5 in.)
● MT1600H – 762 mm x 508 mm x 381 mm (30 in. x 20 in. x 15 in.)
● MT2600H – 762 mm x 660.4 mm x 457.2 mm (30 in. x 26 in. x 18 in.)
● MT800H – 9.43 kg (20.8 lbs.)
● MT1600H – 14.06 kg (31.0 lbs.)
● MT2600H – 17.69 kg (39.0 lbs.)
Certifications ● FCC, CE, RoHS